How to predict the vehicle’s battery runs out in advance?

The weather turns cold, and some earlier than the owner, while driving in the parking lot, found a condition of low Sony VGP-BPS2B Sony VGP-BPS2C battery. Frustration can only help others, through other vehicles by an electric starter, and even on call vehicles for emergency services.

In fact, the car will soon run out of battery before signs will be achieved through a variety of tips, owners can observe in peacetime.

One night driving when the car in neutral hang clothes, or vehicles with automatic stop at red lights, the lights are dimmed considerably, this means that battery life will soon end. Because the stalled when idling engine operation, insufficient to provide electric light at night when mainly powered by battery, the battery when the end of life, they are insufficient to provide adequate electricity for lighting, if the lighting is dark down. Inspiron 1501 battery Inspiron 6400 battery

2 to start the car when you must also be noted that if the ignition power was clear that the lack of sparking speed than the first, and more vehicles, and no other problems, then we must see if the battery is dead.

3 sounded his horn, the sound becomes smaller. Open lights, such as lighting BAI Liang, indicating that the normal battery, so dark red lights, then the lack of electricity. If connected to the engine speed to normal, although slightly dimmed the lights, but there is still enough light, which indicates a good battery, charged over foot if the engine seems weak, and the lights become very dark, indicating that the battery-discharge must immediately charge such as connected to the engine, the dark red light and immediately turn off the engine, then discharge the battery has exceeded the limit or plaque was seriously sulphide. A1045 PowerBook G4 15 battery

If the car does not have electricity, there will be no traffic lights and speakers silent state, but even they can not even radio too.

The market prospects for battery repair

China is the world’s lead-acid battery production and power marketing, lead acid Sony VGP-BPS2 Sony VGP-BPS2A battery has been 200 years of history, is a widely used power supply. With raw materials readily available, inexpensive, reliable and good, there is approximately 95% market share. Lead-acid battery as a stable power supply and the main DC power supply, high demand, with a large quantity, and is closely linked to our social life. Lead-acid battery life design is typically 10 years, but real life is only a year or two. Studies have shown that the battery of the actual use of the procedure, if properly used and maintained, for example, charging less than the regular time, non-payment, long term and excessive discharge of other reasons, most boards will gradually produce a hard, coarse grains and the electrical conductivity of poor quality - - sulphate of lead. This traditional method of charging lead sulfate is difficult to restore, while charging poor charge acceptance of a large number of precipitates gas, a phenomenon known as “non-reversible sulfation”, called “cure”, also called salt. Coarse grains plate of lead sulfate clogged pores, so that the electrolyte infiltrated in the difficulties and increased resistance, resulting in battery capacity due to the decrease can not be used, and now all kinds of lead in products battery acid, whether domestic or imported, usually a year there will be charges on the difficulties in the ability to reduce these phenomena, premature failure discarded far from the design life. In 2004 alone, China scrapped lead acid batteries just over 100 million per year, the average rises to tens of thousands of small and medium-sized cities with more than medium-sized cities were up to several hundred thousands or even millions, of which 90% of the battery is because the sulfuric acid salinization and demolition. Lead acid GK479 FK890 batteries of the early obsolescence is not only a waste of energy, but also seriously pollute the environment, recycling of batteries and their recycling has become all levels of government and business and institutions concerned about hot spots.

 In the United States and Japan and some other developed Western countries, only lead acid batteries, and routine maintenance and maintenance treatment of battery recovery and waste recycling hundreds of thousands of practitioners that up to 100 billion dollars and annual profit is enormous.

“Particle digital program controlled lead-acid battery repair technique is the Beijing National Joint Technology Development Co., Ltd. particles using the latest technologies and cutting edge international digital program controlled by the theory developed by polymerization can resume as new high-tech batteries, the technology to the physical and chemical theory to eliminate sulfide combine, and can actually remove the battery plates sulfide, reached a moment to clean the battery plates of lead-maintenance battery acid, maintenance and repair and maintain the new state plate, so that the battery capacity output stability of total and complete change in the phenomenon of sulfation of batteries, the highest level of lead acid batteries to extend the protection of the life of the battery detection, system repair, by any means complete overhaul, first of all the groups to determine the A1078 A1045 battery capacity and the exact degree of aging. Other provisions repair load balanced using the latest wave of patent leadership International particles restoration techniques, digital process control particle-wave scanning, frequency scanning and particle wave changes, look for crystals lead sulfate resonant frequency, without damage to the electrode edge cases, has issued a particle-wave plate to produce resonance, so that the sulfuric acid in a more unstable molecule lead, then repair digital program controlled by particles from the gradual decomposition of the battery pole plate off and converted to a visit to the state of plasma, electrolyte battery to its original state, rate of repair up to 95% with a high repair rate, using a wide range of effects of repair is good, inexpensive, easy to use and so on, while the system also has the ability to detect, in the resistance testing, load balanced, non-healing capabilities destructive. In failed scrapped lead acid batteries, as the official standard production plant, whether imported or locally produced, or no regular maintenance, rich or poor liquid type liquid-type solid colloids, both because of sulphide Disposal (except for physical damage, such as plate off, the internal circuit, short circuit, etc.), use of the system can be repaired. Fix a set of PA3451U-1BRS PA3399U-1BAS batteries used (bottle) only once in electricity costs from 100-300 yuan, a huge margin.

Solar light and heat combined to form new ideas

Recently, American researchers are jointly developing solar multi-level cell hybrid solar thermal, solar photovoltaic VGP-BPS9A/B VGP-BPS9/S cells, and the combination of thermoelectric materials used to absorb light and heat are two different forms of solar energy. Meanwhile, the U. S. Department of Energy is also expected that solar cells made of tiles, replacement of tiles now widely used in wood, to help the environment. To achieve this goal, the Department of Energy to the United Engineering Corporation Weidlinger allocated 150 thousand U.S. dollars of funds to help for the first phase of research and development.

Currently working with Columbia University in New York. Researchers hope that the roof solar panels solar thermal hybrid solar conversion efficiency can reach 12% even if efficiency is not high, but given the low cost, is still attractive. Currently, the models produced: In the solar panels in the outer layer of protection are solar photovoltaic cells, followed by the researchers called “sandwich functional extensions and the plastic tube composed of thermoelectric materials. In - head of plastic pipe in cold water cooling panels to play the role of output in heating hot water for people to use. In the plastic tube below the bottom plate of the RN873 Y6142 battery: stories reinforced plastic. solar photovoltaic cells to solar electromagnetic radiation into electricity, while the thermal layer is the solar thermal energy converted into electricity. Researchers have presented, plastic pipe “feature upgrades sandwich in all Hybrid Solar panels plays an important role, especially in summer, the temperature of the solar battery is too high, the conversion efficiency is low, plastic pipe cooling device time role will be very obvious.

Currently, other than the laboratory at Columbia University, have been tested, the battery will be in New York, Douglas College (FDA) of a roof area of 6.4 square meters of construction on the subject tests. The researchers also calculated the cost of technology to produce electricity, which is determined that a new A1078 A1175 energy technology can compete with fossil fuels, the most elementary norms.

This is the first phase of the experiment. If the success of this phase, researchers will be 6 months after the second stage: one million dollars from the Department of Energy to obtain funds in one year, the technology has been further improved. After the third phase is likely to cost 10 million U.S. dollars for technology, commercial production. Some studies presented, and they wanted to end within five years, the technology to market.

U. S. Department of Energy said they were very supportive of this plan. Solar cell has not been able to penetrate the market, mainly due to the high initial cost, conversion efficiency is low, but the hybrid solar thermal rooftop solar panels are part of the surface of the building and efficiency has been improved. At the same time, these low-cost, durable panels is extremely suitable for installation in residential and commercial common, the vast range of uses and broad prospects. F4809A F4812A