14 kinds of mobile phone battery charging tips

Users want to extend the effective use of battery time, in addition to the quality of the shipper must have guarantees are essential for the proper loading techniques, because the poor quality of the charger or charging the wrong methods will affect the battery life and the life cycle, following the technical support:

1. The battery factory, manufacturers have made active treatment, and conduct pre-charge the batteries have more than electricity, one of my friends said that the battery charge in accordance with the period of ‘adjustment, standby is still a serious shortage, if the battery is indeed the battery brand, then this case adjustment period should be extended another 3 to 5 times fully charge and discharge.

2. If you buy a new cell phone battery is a lithium-ion battery, then the first 3 to 5 charge time commonly called an adjustment period, more than 14 hours should be sufficient to ensure full activation of the lithium - ion activity. Lithium-ion battery without memory effect, but a strong inert, should be given to fully activated to ensure that used to achieve best performance.

3. Some automated intelligent rapid charger when the lights change direction, but it was only 90% full. Charger will automatically change with the slow loading of the battery is full. Is best used when the battery is full, otherwise it will shorten the duration of use.

4. Before charging, lithium batteries do not need special discharge, discharge improper apple A1079 battery will be damaged. Charging as much as possible to slow charge to reduce the fast charge mode, time should not exceed 24 hours. After three to five times the battery fully charged and discharged its internal chemicals will be all the “activation” for best results.

5. Please use the original or the reputation of a good brand of chargers, batteries use lithium battery charger lithium dedicated, and follow the instructions, otherwise it could damage the battery or even dangerous.

6. There are many users, often in charge when the phone open, in fact, it will hurt the mobile phone life very easily, because only in the charging process, the cell phone circuits will be the fever at that time ’s there are external phone, you may produce transient current feedback, to damage the internal parts of the phone.

7. The battery life determined by the number of repeated charge and discharge, he should try to avoid that the Dell 6Y270 battery during charging, it will shorten the lifespan of the battery. Phone battery off for more than 7 days should be the first mobile phone is fully discharged, adequate electricity and then use.

8. Mobile phone battery self-discharge exist, not when the nickel-hydride batteries, metal a day to about 1% of the remaining capacity of the discharge, lithium batteries a day 0, 2% ~ 0.3% of landfill. Charging the battery, try to use a dedicated outlet, do not leave electrical appliances such as charger and TV.

9. Although the network coverage of mobile telephony in the region, but the phone off when charging is more acceptable and appeal. At this point, you can use the phone is not connected to the transfer of functions have been transferred to the side of the landline phone to avoid the loss of calls, this method is not for network coverage mobile phone in the area of weak signal, or is temporarily unable to connect when you apply.

10. Do not expose the hp 367759-001 battery to warm or cold as a dog day, and turning the phone on the car to withstand exposure to blazing sun, or get air-conditioned room, the air conditioning blowing right places. When charging the battery a little heat is normal, but can not be Jinshou high temperature “suffering.” To avoid such situations, it is preferable to perform at room temperature during charging, and does not cover anything on the phone.

11. Nickel-cadmium (N ICD) must ensure that the battery until the battery completely without power, then in charge must ensure that the battery is fully charged.

12. If the mobile phone battery to attach too long without employment, it is best to call the maintenance department to apply to batteries for treating live, you can have a device constant DC voltage by adjusting the voltage of 5 ~ 6V, Current 500 ~ 600mA reverse battery connector. Note that the liberalization of touch, most can be repeated three times, after such treatment, re-use original charger “adjustment” charge.

13. The higher the load when it is not good, not to protect the IBM ThinkPad T42 battery from full charge circuit should be stopped immediately, otherwise the battery overheating due to heat or impact performance.

14. Dedicated lithium-ion battery charger must be selected, or they may not reach saturation, the impact on its performance. After loading, the shipper must avoid placing more than 12 hours or more in the long term without the battery and cell phone must be separated.