Rechargeable battery identification method
According to the IEC standard Ni-Cd Ni-MH battery’s identification of five components:
1. Battery Type KR identify nickel-cadmium batteries HF said that HR-type Ni-MH Laptop battery Ni-MH battery.
2. Battery size information, including the diameter of a cell width height circular square of the thickness of the battery with a slash between values separated by units of mm.
3. Discharge characteristics, said symbol L appropriate to the magnification in the discharge current 0.5C or less.
M said that the magnification in the proper discharge current 0.5-3.5C or less.
H said that the magnification in the proper discharge current of 3.5 7.0c or less.
X indicates that the battery 7C-15C high discharge rate current work.
4. High-battery symbol with temperature T said.
5. Drums FC connection piece, said on behalf of SS without connecting part, said battery connected in series pull-shaped pieces used to connect pieces HB indicates that the battery connected in series with one side of the connecting piece.
For example, a square nickel-metal hydride batteries that HF18/07/49 width 18mm, thickness 7mm height of 49mm.
KRMT33/62HH that nickel-cadmium battery discharge rate in the 0.5C-3.5 series between the high temperature single battery without connecting piece diameter 33mm height 62mm.
Lithium secondary battery according to IEC61960 standard identification is as follows:
1. Battery identifies the composition of three letters followed by a figure five or six square digital cylindrical.
2. The first letter said that I said the battery anode material for lithium-ion battery with built-L, the electrode of lithium metal or lithium alloy electrode.
3. The second letter indicates that C-based cathode materials for VGP-BPS9A/B battery electrodes N nickel cobalt-based electrodes M manganese-based electrode V of vanadium-based electrodes.
4. The third letter R, said cylindrical cell battery, said L square cells.
5. Digital cylindrical drums 5 digits, respectively, the diameter and height of the battery unit is millimeters in diameter.
The unit of degree one tenth of 1 mm in diameter or height of any size greater than or equal to 100 mm where the two dimensions should be added between a slash.
Square VGP-BPS10 battery 6 digits, respectively, the thickness of the battery pack from the width and height of 1 mm 3 dimensions of any size greater than or equal to 100 mm where the slash between the three dimensions should be added that if one of less than 1 mm, whereas in that size preceded by the letters T to one tenth of the size of a millimeter unit.
For example:
ICR18650 a cylindrical lithium-ion battery cathode material of cobalt with a diameter of approximately 18mm to approximately 65mm high.
ICP083448 a lithium secondary material square-ion battery cathode cobalt thickness is about 8 mm, the width is about 34mm high by about 48mm.
ICP08/34/150 a lithium secondary material square-ion battery cathode cobalt thickness is about 8 mm, the width is about 34mm high by about 150mm.
ICPt73448 a lithium secondary material square-ion VGP-BPS9 battery cathode cobalt thickness is about 0.7 mm, the width is about 34mm high by about 48mm.
