The battery maintenance is very important

Teach you some proper method about the maintenance of battery. Mainly divided into the following four points:

First, to avoid the complete discharge and often charge lithium batteries. The repeated arbitrarily rechargeable lithium VGP-BPS2B battery damage is very small, almost negligible.

Second, placed the lithium batteries which need to keep hold in the shade, remember not to put in the refrigerator. To avoid prolonged on the high-temperature places, if you need save the Dell Inspiron 8500 battery for a long time, please charge to 50% before storage.

Third, if you are using a fixed power supply most of the time, please remove the batteries and place in the shade.

Fourth, no need to purchase spare lithium batteries for storage, so this piece is actually a waste of hp 367759-001 battery.

General users in accordance with the above four points, basically they can make their own laptop batteries live longer.

With regard to the security of laptop battery

1. Do not try to break down, repair or tamper with Laptop batteries. The battery will overheat and burn. Corrosive alkaline solution or other electrolyte leakage can cause fire or injury, severe may cause death.

2. Do not connect the battery electrode to metal objects, which could cause fire or damage the battery and cause injury. In order to avoid accidental short circuit, when store battery, the Dell Latitude D510 battery should be placed in anti-static bag, and sealed electrodes with insulating tape.

3. Do not use sharp objects piercing the battery.

4. Do not expose the battery under the heat source.

5. Not allow the battery too damp, wet batteries can overheat, burning or rupture.

6. Do not let the hp HSTNN-lB31 battery electrolyte come into contact with eyes, skin or clothing. If you come into contact with eyes, immediately flush eyes with plenty of water and see a doctor to prevent eye damage. If you come into contact with skin, wash immediately with water to prevent the skin allergies. If you come into contact with clothing, immediately took off his clothing to prevent contact with skin or eyes.

7. If any of the following phenomena happens, please turn off the power immediately, and remove the battery: pungent or strange odor, overheating, discoloration or deformation. Likely to smoke or fire, the apple A1061 battery fractured.

8. Do not install or remove the battery before you disconnect AC power.

Frequently questions and solutions in the using process of laptop battery

Question 1: the battery is installed several times, still can not boot?

Possible reasons:

1. The battery installed bad.

2. The battery did not use for a long-term.

3. Depth of discharge protected.

4. Other reasons.

Solution:

1. Carefully examined whether the computer interface and battery interface connection is correct.

2. Installed the battery, use the laptop ac adapter to charge for a while to activate the battery, disconnect the adapter in the off state, and re-boot.

3. Please contact for a new battery.

4. Contact after-sales service or local franchiser.

Question 2: the battery is not used for some time, the power reduced or no electricity when re-use

Possible reasons:

1. No charge 50% to store, electricity itself is very small

2. Subject to the battery quality or the environmental impact, the battery power naturally ullage

3. Shelved for too long without regular charging and discharging of the battery which caused the natural decay.

Solution:

1. It can be normal used after 100% charge.

2. A normal phenomenon, can be used normally after recharge.

3. Please replace a new Dell XPS M1210 battery.

Question 3: battery shows charging have been completed (100%), but after AC power is disconnected, the battery can not normally supply and cause the computer crash.

Possible reasons: a. The working environment temperature is too high, causing the battery over-temperature protection. b. The battery had problems in the process of charging, leading to electricity display distortion.

Solution:

1. Turn off the computer, remove the battery for cooling and use in the normal indoor environment, the battery over-temperature protection can be automatically restored

2. Using the original battery to detect fault under the same conditions. If the original battery has no such problem, you need to contact after-sales service or local franchiser.

Question four: after install the battery, the laptop could work properly, and also be able to charge and discharge, but the hp PB991A battery information display are not complete, only shows parts of the information.

Possible reason:

Battery or laptop interface contact bad or the data exchange interface didn’t work

Solution:

replace the original battery, if it is the same fault, it is laptop or battery interface damaged, need to repair. If the failure eliminate, it is part of the battery output interface damaged, please contact the local franchiser or after-sales service to replace the battery.

Question 5: after install the battery, the Laptop battery indicator has been in a state of blinking and notebook tips for non-compliant

Possible reason:

This is part of the battery and notebook compatibility issues

Solution:

Contact after-sales Service or distributor

Question 6: the computer automatically shuts down immediately after install the battery in the state with an adapter

Possible reason:

Battery failure, may be the interface short-circuit the battery 

Solution:

Remove the battery immediately, and do not try to install the battery again. Please contact the distributor to replace the battery

The things we should aware when using the laptop battery

LAPTOP Battery Description: Currently, the use of lithium batteries for laptop mostly, though there Lithium battery is better than many other advantages, such as the absence of memory effect, high capacity battery, charging time is short and so on, but it is also more valuable and limited life electronic components. Under normal circumstances, the number of notebook battery charge and discharge also in the 800.

In accordance with the guidelines of the IBM manual on basic use of the relevant part of finishing the knowledge of the battery:

Use the correct power cord and AC adapter (laptop ac adapter) saying goes, is the processor. The main sections are the following:

1. To avoid the use of non-confidence in power, to avoid unstable power laptop burned;

2. To prevent fluid contamination by lead adapter to short-circuit;

3. To avoid power lines across the aisle, both easy to stumble upon another, but also easily lead to poor nutrition has been violated;

4. Avoid using packaging other packaging of the power adapter, resulting in problems of heat dissipation. Battery and power adapter to maintain good ventilation and heat dissipation.

5. Using the power corresponding to the product manufacturer and battery. Do not use third-party solutions. This laptop easily lead to damage or can not play the best performance.

6. Do not attempt to open or maintain the cell (excluding professionals), because the control circuit of the battery within the accuracy of violence likely to cause damage to precision circuits.

7. Do not be such as batteries and keys scattered together a metal material to prevent accidental short-circuit the battery.

8. In bed, sofa, carpet and other soft surfaces when used in laptops has been careful not to obstruct heat dissipation.

9. In accordance with the relevant web site describes the battery charge and discharge summary and the normal use of the technique. Because Laptop batteries lithium-ion battery manufacturers in different production processes are different, so the battery inside the control circuit has its own characteristics, and this tour will not hesitate to adjust the state information, battery therefore in accordance with the instructions on the laptop recommended load and discharge method is to use the battery is the best. It is better to keep a full load (Automatic Red State notebook End) to fully discharge (used in stand-by) such a condition.

10. If there is a situation of external power, it is preferable to remove the laptop battery and unplug the external power supply is connected to a charge-discharge process, which can lead to Li-ion battery inside the battery status in the analysis when the circuit is disrupted.

11. If no long-term use of laptop batteries, must be made each month, a full charge and discharge, to maintain cell viability. In addition, if long-term (year) not to use the laptop battery should be charged 50%, and the charge once a year to avoid excessive discharge of the battery. If the charging time of the arrest may produce better results, but does not require to be stopped.

12. If you can load 30 minutes after the completion of the reuse of the battery may have a better battery.

13. Ships with installation of mobile software power management to better play the role of the Dell Inspiron 1501 battery and battery protection.

14. Do not use the display too bright LCD, under normal circumstances do not need the LCD display mode brighter, so we do not feel brilliant, but also extend the life of the LCD, the same will not see the light “annoying background.” The best in different working environment to adjust the brightness of the right to protect the view.

Finally, the Key Tips: laptop batteries contain lithium, if used or handled properly, could be an explosion.

How to correctly charging laptop battery

In Laptop battery using process, do not deliberately request to 100% charge, or use completely without electricity untill automatic shutdown, the correct way is to begin to charge about 20% , stop charging  about 98% full. If the machine has the power calibration procedure, then you can calibrate the battery when you feel significantly reduced power consumption, so that protection circuit can fully work. For early notebook batteries (Ni-MH or Ni-Cd), really need to fully charge and discharge in order to maintain good battery capacity, but for the lithium battery, it is not necessary but may damage the Dell Inspiron 1501 battery. It is said that lithium batteries have no memory effect, in fact it’s not entirely correct. It’s only a very small memory effect. Materials for lithium battery are very sensitive to the temperature, the use frequency and so on. After using for a period time, the battery will be aging, the performance of the most intuitive is the reduction of using time.

The natural ullage is an important reason, and inadequate maintenance is another important reason. A well-designed lithium battery has a very good protection circuit to prevent excessive charge and discharge. For over-charging and discharging of the hp 361742-001 battery will rapidly reduce the battery activity. Because of the role of the protection circuit, the user repeated several times to fully charge and discharge, in fact, it is impossible to achieve “full” level. It does not make sense to do so. Sometimes WINDOWS show there is 20% of battery capacity, you can use 30 minutes, but not long after, suddenly the machine automatically shut down, this is because the battery has been aging, the battery protection circuit can no longer monitors the real capacity of the battery. In the normal battery depletion, the protection circuit original parameters have been unable to properly reflect the actual situation of the battery, so the power calibration procedure is to correct the benchmark protection circuit parameters to accurately reflect the actual capacity of the battery. But this correction process will often take two or three complete charge and discharge, and as previously mentioned, fully charge and discharge will reduce the Dell XPS M140 battery activity, so please not frequently used.