To extend mobile phone battery life, should pay attention to the following questions: when the network signal does not exist or is extremely weak, they should turn off cell phones. As far as possible to choose the network signal strong local call.

Optional power-saving mode

With an advanced GSM standard features, that is, most of the phone have a “DTX” continuity of the non-fired power-saving mode. In order to power, when the owner is not audible when the phone for the time being launched to reduce the power of radio. Experiments prove, DTX power-saving mode can be extended talk time up to 30% -50%.

In the quiet of the occasion should switch to static, short of ringing telephone.

Select button, or turn off the display lighting.

To avoid the bitter cold when the battery temperature is too low, or else time will be shortened.

The basic method of charging the battery

As a result of different characteristics of the battery, so manufacturers are required to follow the instruction manual method of charging. Standby standby, the phone battery is also expensive. If the rapid charge, the phone will be required to shut down or taken out later by a rechargeable battery.

Quick Charge

Some automated intelligent rapid charger when the lights change direction, that is full of 90%. Charger will automatically slow to change with full battery charge will be. After the battery will be full of the best, otherwise they will be used to shorten the time.

Battery memory effect

If the battery is a nickel-cadmium batteries, not long-term total charge, discharge, easy marks left in the battery, reducing battery capacity, a phenomenon known as the battery memory effect. This means that the battery seems to remember the user’s day-to-day charge, discharge rate and pattern, in the course of time it will be very difficult to change this pattern, do not substantially charged or discharged.

Elimination of memory on a regular basis

Nickel-cadmium batteries because of the memory effect, it must be the elimination of memory on a regular basis. The battery is fully discharged and then re-filled. Electrical discharge can be put to use or discharge of the functions of charger also can use the cell phone back-up stand-by mode. If you can speed up the discharge display and lighting of the phone keys to open. To ensure that the batteries can be filled in accordance with the instructions manuals to control the time, sufficient to repeat, the discharge of two to three times.

Mobile phone battery types

At present, mobile phone batteries are mainly three types: nickel cadmium (Nicd) batteries, nickel metal hydrogen (Nimb) batteries and lithium-ion battery. Nickel-cadmium batteries can be a greater load current for fast charging. The disadvantage is that the battery prone to memory effect; rapid application of the charge. The disadvantage is that the battery prone to memory effect; nickel metal hydride batteries, the industry has been referred to as “environmental protection batteries.” It is the cell phone quality, safe and reliable, and is beneficial to the environment of the cell; lithium-ion battery energy storage of high-density, you can reduce the weight of the phone. The disadvantage is the higher cost